Patient Back-up to CD

Patient to BACKUP1:

1. Click on Archive application.
2. Open BACKUP1 Tab.
3. Click on Directory and the Patient Listing will apppear.
   There are three Options:
   1. New patient backup - the system will have no directory and ask for label.
   2. Empty ready to be filled.
   3. Full from previos back-up and needs to be emptied. For this option, the directory has to be Initialized by pressing the Initialize button and enter label.
4. Highlight Patient or Patients (select only a few at a time or be prepared for a long wait).
5. Stop the back-up process at 75-80 % used.

BACKUP1 to CD for the Entegra:

1. Partial shutdown on the entegra application.
2. Insert a blank cd.
3. Close the CD Creator application.
4. Open MY COMPUTER.
5. Highlight E drive ( CD-drive).
6. Right mouse click and select FORMAT.
7. Label and the disk or accept default naming-- START FORMAT.
8. Click OK when disk is formatting is complete.
9. Open Entegra application.
10. Click on Archive application.
11. Open Backup 1 Tab.
12. Click on Directory and the Patient Listing will apppear.
13. Click on Burn CD button and messages will appear stating the status of the burn.
14. Message will appear Burning CD Successful and press OK.
15. Partial shutdown on the entegra application.
16. Open MY COMPUTER.
17. Highlight E drive ( CD-drive).
18. Right mouse click and select EJECT.
19. Check on option-Close to Read on any Computer and check Protect CD-then OK.
20. Disk will finish off and EJECT - remove and label.